Pivex is a professional grade solvent adhesive specially formulated for joining PVC pipes. It is durable, fast-drying and quick-curing.

HOW TO USE

1. Stir well before using.
2. Thoroughly clean surfaces to be bonded.
3. Apply a thin uniform film of adhesive by brush or spreader.
4. Combine both surfaces to be bonded while adhesive is still wet.
5. Allow adhesive to set for 5 minutes before handling glued tubes.
6. Approximate drying time is six (6) hours.

PRECAUTIONS
Flammable. Avoid naked flames and hot surfaces. Harmful if inhaled. Ensure adequate ventilation when applying and until dry. Avoid contact with skin and eyes. Store in the original closed container out of reach of children.

SIZES AVAILABLE

Printer-friendly product description: Pivex (PDF)

Fast-grabbing and quick-setting, Holfast is a professional grade adhesive for use in woodworking and for wood-based surfaces.

HOW TO USE

1. Shake well before using.
2. Thoroughly clean surfaces to be bonded.
3. Apply a thin uniform film of adhesive by brush or spreader.
4. Combine both surfaces to be bonded while adhesive is still wet and secure by clamping.
5. Sets in 30 – 60 minutes.
6. Approximate drying time six (6) hours.
7. Clean brushes or other application equipment with water.

PRECAUTIONS

Store in the original closed container out of reach of children.

SIZES AVAILABLE

Printer-friendly product description: Holfast (PDF)

Super-active and super-strength, the new B35 Shoe Glue bonds leather-to-leather, leatherette, polyurethane foam and composition inner sole surfaces.

HOW TO USE

1. Stir well before using.
2. Thoroughly clean surfaces to be bonded.
3. Apply a uniform film of adhesive by brush/roller to both surfaces so that a wet thickness of 3-4mils is achieved.
4. Allow the solvent to flash off (approximately 5 minutes) then combine surfaces while the adhesive is still tacky.
5. After mating the surfaces, apply as high a pressure as is practical within the limitations of the material bonded. The pressure need only be momentary, but should be uniform over the surface.
6. Clean brushes or other application equipment with trichloroethylene.
7. Avoid inhaling vapor. Ensure adequate ventilation when in use.

PRECAUTIONS

Flammable liquid. Keep away from heat, sparks and flame. Keep container closed. Use with adequate ventilation. In case of fire, use water spray, foam, dry chemical or CO2. Store in the original closed container out of reach of children.

SIZES AVAILABLE

Printer-friendly product description: B35 Shoe Glue (PDF)

An industrial grade contact cement, Conad bonds laminate, particleboard, plywood, hardboard, steel and aluminum.

HOW TO USE

1.Stir well before using.
2. Thoroughly clean surfaces to be bonded.
3. Apply a uniform film of adhesive by brush/roller to both surfaces so that a wet thickness of 3-4mils is achieved.
4. Allow the solvent to flash off (approximately 5 minutes) then combine surfaces while the adhesive is still tacky.
5. After mating the surfaces, apply as high a pressure as is practical within the limitations of the material bonded. The pressure need only be momentary, but should be uniform over the surface.
6. Clean brushes or other application equipment with trichloroethylene.
7. Avoid inhaling vapor. Ensure adequate ventilation when in use.

PRECAUTIONS

Flammable liquid. Keep away from heat, sparks and flame. Keep container closed. Use with adequate ventilation. In case of fire, use water spray, foam, dry chemical or CO2. Store in the original closed container out of reach of children.

SIZES AVAILABLE

Printer-friendly product description: Conad (PDF)

SteinBond is a superior leather, metal, laminate, foam and wood adhesive.

HOW TO USE

1. Stir well before using.
2. Thoroughly clean surfaces to be bonded.
3. Apply a uniform film of adhesive by brush/roller to both surfaces so that a wet thickness of 3-4mils is achieved.
4. Allow the solvent to flash off (approximately 5 minutes) then combine surfaces while the adhesive is still tacky.
5. After mating the surfaces, apply as high a pressure as is practical within the limitations of the material bonded. The pressure need only be momentary, but should be uniform over the surface.
6. Clean brushes or other application equipment with trichloroethylene.
7. Avoid inhaling vapor. Ensure adequate ventilation when in use.

PRECAUTIONS

Flammable liquid. Keep away from heat, sparks and flame. Keep container closed. Use with adequate ventilation. In case of fire, use water spray, foam, dry chemical or CO2. Store in the original closed container out of reach of children.

SIZES AVAILABLE

Printer-friendly product description: Steinbond (PDF)

QuikBond is ultra-strength cold woodworking glue. A ready-to-use synthetic resin adhesive, it is ideally suited where excellent initial tack and fast-drying time are required. It is yellow in colour and specially formulated as a water-resistant glue that is sandable, paintable and cleans up easily.

HOW TO USE

1. Shake well before using.
2. Thoroughly clean surfaces to be bonded.
3. Apply a uniform film of adhesive by brush or spreader. For hardwood, apply to both surfaces.
4. Combine both surfaces to be bonded while adhesive is still wet and secure by clamping or pressing. Clamping time is approximately 20-30 minutes.
5. Clean brushes or other application equipment with water.

PRECAUTIONS

Store in the original closed container out of reach of children.

SIZES AVAILABLE

Printer-friendly product description: Quik Bond (PDF)